We have the infrastructure in place to accommodate projects large and small, complex to easy. L-3 Aeromet has two facilities located in Tulsa, Oklahoma, our home for many years, located at R.L. Jones Jr. Airport and leased office and laboratory space on the 38th floor of the CityPlex Tower. As a part of the L 3 IS family, we also have facilities in Greenville and Waco Texas.

Our facility on R.L. Jones Jr. Airport, is a custom designed hangar and office building. This facility offers 25,000 square feet of hangar space and an additional 25,000 square feet for management, engineering, production, and manufacturing services.

	Optical Support Equipment		Optical Support Rooms
	Overhead Crane		Clean Room
	Collimator		Electronics Lab
	Integrating Sphere		Image Processing Lab
	Temperature Controller		Mechanical Fabrication
	Black Body		Optics Lab
	Flow Bench		Systems Integration Laboratory
	Granite Surface Plate		Software Development Facility
	Rolling Scaffolding

	Runway: 5102 x 100 ft., asphalt		Instrument Landing System (ILS)
	Ramp space: 67,500 sq ft, lighted		Safety equipment
	Ground Support: wide variety		Fuel facilities
	FAA- approved Control Tower		Other airfield support facilities

Our additional office and laboratory space is in the CityPlex Tower located at 81st Street and Lewis Avenue, Tulsa, conveniently located just across the Arkansas River from our airport facility. The CityPlex Towers offer all the amenities of a large office complex. We are leasing the 38th floor, which offers 11,250 square feet of floor space. Our facilities have ample office areas and large and small conference rooms. Additionally, the CityPlex Towers have conference room catering service available for larger meetings.

L-3 IS facilities located at Greenville Texas enable our team to accommodate any size aircraft. L-3 IS’ home office is located on Majors Field Airport and is a world-class depot and modification facility built to handle and sustain large multi-engine aircraft. The Greenville location is recognized for its support to special-mission platforms and possesses all the facilities, capabilities, and engineering expertise to fully support large aircraft.

As with our Tulsa facility, L-3 IS Greenville can perform all inspections and maintenance requirements on-site. The facility is a Designated Alterations Station (DAS), which can support future aircraft modifications.

Majors Field Airport is ideally suited for large aircraft and can support all aspects of large aircraft operations, maintenance, and modification on-site. These capabilities include flight sciences, heavy maintenance, modification, and flight-testing. The airfield accommodates operations 24/7 for virtually any type aircraft and routinely handles large military (C-5, C-135, C-141, C-17, C-130)

	Runway: 8039 x 150 ft., concrete with asphalt overlay
	Ramp Space: 3,000,000 sq ft, lighted
	Ground Support Equipment: wide variety
	FAA-approved control tower
	Flight planning and briefing rooms
	Category 1 ILS
	Safety equipment
	Fuel storage facilities

The 3,000,000-sq. ft. ramp space is fence enclosed and provides 24-hour security and lighting. Tie-down stations throughout the ramp area are equipped with static grounds and electrical power outlets to facilitate preflight and postflight operations. The existing support equipment includes mobile fueling and oiling vehicles, auxiliary power units, air-conditioning units, portable workstands, lavatory and portable water trucks, and special-purpose tugs and towbars.