
|
| HMPT 500/600HP Transmission |
|
|
|
|
For up to 33 ton (30 tonne)
vehicle applications |
|
| INPUT RATING |
| Power, net hp (kw) |
600 (450) |
| Speed, r/min |
2,600* |
| (Other input ratios available to match engine
speed) |
| OUTPUT RATING |
| Maximum torque, lb-ft (Nm) |
6,800 (9,200) |
| WEIGHT |
| Dry, lb (kg) |
1,944 (875) |
| Oil, lb (kg) |
100 (45) |
| VOLUME |
21ft3 (.6m3) |
| POWER DENSITY ft3 (m3) |
29 hp/ft3 (760 kw/m3) |
| POWER TAKE-OFF |
Full power, constant running |
| SERVICE AND PARKING BRAKES |
Mechanically actuated, oil-cooled, multiple disc |
| DYNAMIC BRAKING |
Full engine retarding torque, plus limited hydrostatic
retarding |
| STEERING |
True pivot, infinitely variable ratio hydromechanical,
fully regenerative, without use of brakes or clutches |
| INPUT DISCONNECT |
Hydraulically actuated clutch to disconnect power train
for reduced cold-weather cranking torque and improved fuel economy at
idle |
CONTROL - TRANSMISSION
ELECTRONIC CONTROLLER - TEC
|
The TEC automatically adjusts the transmission ratio to
operate at most efficient engine speed based on throttle position and
vehicle load |
| HYDRAULIC |
| MIL-L-2104 |
Grade 30, above 0 degrees F (-18 degrees C) |
| MIL-L-46167 |
0 degrees F to -65 degrees F (-18 degrees C to -54 degrees
C) |
| Filtration |
40 |
| ATTITUDE |
70% fore and aft slope
45% side slope |
| *2,200 to 3,000 r/min can be accomodated in
the design |
|
|
|