
|
| HMPT 800HP Transmission |
|
|
|
|
For up to 30-40 ton (27-36
tonne) vehicle applications |
|
| INPUT RATING |
| Power, net hp (kw) |
800 (597) |
| Speed, r/min |
2,200-2,900 |
| OUTPUT RATING |
| Maximum torque, lb-ft (Nm) |
13,100 (17,760) |
| Maximum forward speed, r/min |
3,570 |
| Maximum reverse speed, r/min |
560 |
| Steering torque speed side, ft-lb (Nm) |
8,000 (10,800) |
| WEIGHT |
| Dry, lb (kg) |
2,100 (953) |
| Oil, lb (kg) |
90 (40.90) |
| Not including oil in cooler and lines |
|
| VOLUME |
21ft3 (.6m3) |
| POWER DENSITY ft3 (m3) |
38 hp/ft3 (1,000 kw/m3) |
| POWER TAKE-OFF |
Full power, constant running |
| SERVICE AND PARKING BRAKES |
Mechanically actuated, oil-cooled, multiple disc |
| DYNAMIC BRAKING |
Full engine retarding torque, plus limited hydrostatic
retarding |
| STEERING |
True pivot, infinitely variable ratio hydromechanical,
fully regenerative, without use of brakes or clutches |
| INPUT DISCONNECT |
Hydraulically actuated clutch to disconnect power train
for reduced cold-weather cranking torque and improved fuel economy at
idle |
CONTROL - TRANSMISSION
ELECTRONIC CONTROLLER - TEC
|
The TEC automatically adjusts the transmission ratio to
operate at most efficient engine speed based on throttle position and
vehicle load |
| HYDRAULIC |
| MIL-L-2104 |
Grade 30, above 0 degrees F (-18 degrees C) |
| MIL-L-46167 |
0 degrees F to -65 degrees F (-18 degrees C to -54 degrees
C) |
| Filtration |
40 |
| ATTITUDE |
70% fore and aft slope
45% side slope |
| |
|
|
|